温江做网站
新网创想网站建设，新征程启航
为企业提供网站建设、域名注册、服务器等服务
ORACLE_自动发邮件代码
该程序脚本最主要的功能实现为通过oracle自带的过程包发送邮件来监控ETL的执行情况：
ORACLE_SID=orcl
ORACLE_BASE=/opt/oracle
ORACLE_HOME=/opt/oracle/product/10.2.0
export ORACLE_SID ORACLE_BASE ORACLE_HOME
PWD_DIR=/home/oracle/shell
SQLPLUS=${ORACLE_HOME}/bin/sqlplus
CONFIG_INI=${PWD_DIR}/ini/config.ini
while read gameuser
do
echo ${gameuser}
echo ${SQLPLUS}
cd ${PWD_DIR}
${SQLPLUS} ${gameuser} << !
@etl_monitor.sql;
/
exit;
!
done<${CONFIG_INI}
etl_monitor.sql脚本为：
DECLARE
p_txt VARCHAR2 (4000);
p_txt_all VARCHAR2 (4000);
BEGIN
FOR r IN (SELECT job_name,
run_cnt,
table_name,
column_name
FROM etl_monitor_config_tab)
LOOP
-- Call the Etl Monitor function
p_txt :=
etl_monitor (r.job_name,
r.run_cnt,
r.table_name,
r.column_name);
p_txt_all := p_txt_all || CHR (13) || p_txt;
END LOOP;
-- Call the Send Mail function
procsendemail (p_txt_all,
'Etl Moniotr',
'xxx@163.com',
'xxxx@kingsoft.com',
'mail.kingsoft.com',
25,
1,
'xxxxxx',
'xxxxxx',
'',
'bit 7');
p_txt_all := '';
END;
create or replace function etl_monitor(job_name varchar2,
run_cnt int,
table_name varchar2,
column_name varchar2)
RETURN varchar2 IS
v_monitor_date date; --The monitor of the proc's date
v_job_name varchar2(130);
v_log_id number;
v_result1 char(1); --The status of the proc's result1
v_result2 char(1); --The status of the proc's result2
v_status_cnt int;
v_record_num int; --The number of the job run
v_result varchar2(4000);
v_sql varchar2(1000);
begin
v_monitor_date := trunc(sysdate);
v_job_name := job_name;
v_result1 := '0';
v_result2 := '0';
v_sql := 'select count(1) from ';
if run_cnt = 1 then
select log_id
into v_log_id
from user_scheduler_job_run_details
where job_name = v_job_name
and trunc(actual_start_date) = v_monitor_date;
else
select max(log_id)
into v_log_id
from user_scheduler_job_run_details
where job_name = v_job_name
and trunc(actual_start_date) = v_monitor_date;
end if;
select count(*)
into v_status_cnt
from user_scheduler_job_run_details
where log_id = v_log_id
and status = 'SUCCEEDED';
if v_status_cnt = 0 then
goto error1;
end if;
v_result1 := '1';
v_sql := v_sql || table_name || ' ' || 'where trunc(' || column_name ||
') =' || 'trunc(sysdate-1) and rownum=1';
execute immediate v_sql
into v_record_num;
if v_record_num > 0 then
v_result2 := '1';
else
v_status_cnt := 0;
goto error1;
end if;
if v_result1 = '1' and v_result2 = '1' then
v_result := SYS_CONTEXT('USERENV', 'CURRENT_SCHEMA') || '.' ||
v_job_name || ' At ' || v_monitor_date || ' IS SUCCEEDED';
end if;
<>
if v_status_cnt = 0 then
select OWNER || '.' || JOB_NAME || ' At ' || TRUNC(ACTUAL_START_DATE) ||
'IS ' ADDITIONAL_INFO
into v_result
from user_scheduler_job_run_details
where log_id = v_log_id;
end if;
return v_result;
exception
when others then
return SYS_CONTEXT('USERENV', 'CURRENT_SCHEMA') || '.' || v_job_name || ' At ' || v_monitor_date || ' IS NOT EXECUTE';
end;
最主要的procsendmail的过程为：
CREATE OR REPLACE PROCEDURE PROCSENDEMAIL (
P_TXT VARCHAR2,
P_SUB VARCHAR2,
P_SENDOR VARCHAR2,
P_RECEIVER VARCHAR2,
P_SERVER VARCHAR2,
P_PORT NUMBER DEFAULT 25 ,
P_NEED_SMTP INT DEFAULT 0 ,
P_USER VARCHAR2 DEFAULT NULL ,
P_PASS VARCHAR2 DEFAULT NULL ,
P_FILENAME VARCHAR2 DEFAULT NULL ,
P_ENCODE VARCHAR2 DEFAULT 'bit 7'
)
AUTHID CURRENT_USER
IS
/*
作用：用oracle发送邮件
主要功能：1、支持多收件人。
2、支持中文
3、支持抄送人
4、支持大于32K的附件
5、支持多行正文
6、支持多附件
7、支持文本附件和二进制附件
8、支持HTML格式
8、支持
作者：suk
参数说明：
p_txt :邮件正文
p_sub: 邮件标题
p_SendorAddress : 发送人邮件地址
p_ReceiverAddress : 接收地址，可以同时发送到多个地址上，地址之间用","或者";"隔开
p_EmailServer : 邮件服务器地址，可以是域名或者IP
p_Port ：邮件服务器端口
p_need_smtp：是否需要smtp认证，0表示不需要，1表示需要
p_user：smtp验证需要的用户名
p_pass：smtp验证需要的密码
p_filename：附件名称，必须包含完整的路径，如"d:\temp\a.txt"。
可以有多个附件，附件名称只见用逗号或者分号分隔
p_encode：附件编码转换格式，其中 p_encode='bit 7' 表示文本类型附件
p_encode='base64' 表示二进制类型附件
注意：
1、对于文本类型的附件，不能用base64的方式发送，否则出错
2、对于多个附件只能用同一种格式发送
*/
L_CRLF VARCHAR2 (2) := UTL_TCP.CRLF;
L_SENDORADDRESS VARCHAR2 (4000);
L_SPLITE VARCHAR2 (10) := '++';
BOUNDARY CONSTANT VARCHAR2 (256) := '-----BYSUK';
FIRST_BOUNDARY CONSTANT VARCHAR2 (256) := '--' || BOUNDARY || L_CRLF;
LAST_BOUNDARY CONSTANT VARCHAR2 (256)
:= '--' || BOUNDARY || '--' || L_CRLF ;
MULTIPART_MIME_TYPE CONSTANT VARCHAR2 (256)
:= 'multipart/mixed; boundary="' || BOUNDARY || '"' ;
/* 以下部分是发送大二进制附件时用到的变量 */
L_FIL BFILE;
L_FILE_LEN NUMBER;
L_MODULO NUMBER;
L_PIECES NUMBER;
L_FILE_HANDLE UTL_FILE.FILE_TYPE;
L_AMT BINARY_INTEGER := 672 * 3; /* ensures proper format; 2016 */
L_FILEPOS PLS_INTEGER := 1; /* pointer for the file */
L_CHUNKS NUMBER;
L_BUF RAW (2100);
L_DATA RAW (2100);
L_MAX_LINE_WIDTH NUMBER := 54;
L_DIRECTORY_BASE_NAME VARCHAR2 (100) := 'DIR_FOR_SEND_MAIL';
L_LINE VARCHAR2 (1000);
L_MESG VARCHAR2 (32767);
/* 以上部分是发送大二进制附件时用到的变量 */
TYPE ADDRESS_LIST
IS
TABLE OF VARCHAR2 (100)
INDEX BY BINARY_INTEGER;
MY_ADDRESS_LIST ADDRESS_LIST;
TYPE ACCT_LIST
IS
TABLE OF VARCHAR2 (100)
INDEX BY BINARY_INTEGER;
MY_ACCT_LIST ACCT_LIST;
-------------------------------------返回附件源文件所在目录或者名称-----------------------
FUNCTION GET_FILE (P_FILE VARCHAR2, P_GET INT)
RETURN VARCHAR2
IS
--p_get=1 表示返回目录
--p_get=2 表示返回文件名
L_FILE VARCHAR2 (1000);
BEGIN
IF INSTR (P_FILE, '\') > 0
THEN
--windows
IF P_GET = 1
THEN
L_FILE := SUBSTR (P_FILE, 1, INSTR (P_FILE, '\', -1) - 1);
ELSIF P_GET = 2
THEN
L_FILE :=
SUBSTR (P_FILE, - (LENGTH (P_FILE) - INSTR (P_FILE, '\', -1)));
END IF;
ELSIF INSTR (P_FILE, '/') > 0
THEN
--linux/unix
IF P_GET = 1
THEN
L_FILE := SUBSTR (P_FILE, 1, INSTR (P_FILE, '/', -1) - 1);
ELSIF P_GET = 2
THEN
L_FILE :=
SUBSTR (P_FILE, - (LENGTH (P_FILE) - INSTR (P_FILE, '/', -1)));
END IF;
END IF;
RETURN L_FILE;
END;
---------------------------------------------删除directory------------------------------------
PROCEDURE DROP_DIRECTORY (P_DIRECTORY_NAME VARCHAR2)
IS
BEGIN
EXECUTE IMMEDIATE 'drop directory ' || P_DIRECTORY_NAME;
EXCEPTION
WHEN OTHERS
THEN
NULL;
END;
--------------------------------------------------创建directory-----------------------------------------
PROCEDURE CREATE_DIRECTORY (P_DIRECTORY_NAME VARCHAR2, P_DIR VARCHAR2)
IS
BEGIN
EXECUTE IMMEDIATE 'create directory '
|| P_DIRECTORY_NAME
|| ' as '''
|| P_DIR
|| '''';
EXECUTE IMMEDIATE 'grant read,write on directory '
|| P_DIRECTORY_NAME
|| ' to public';
EXCEPTION
WHEN OTHERS
THEN
RAISE;
END;
--------------------------------------------分割邮件地址或者附件地址--------------------
PROCEDURE P_SPLITE_STR (P_STR VARCHAR2, P_SPLITE_FLAG INT DEFAULT 1 )
IS
L_ADDR VARCHAR2 (254) := '';
L_LEN INT;
L_STR VARCHAR2 (4000);
J INT := 0; --表示邮件地址或者附件的个数
BEGIN
/*处理接收邮件地址列表，包括去空格、将;转换为,等*/
L_STR :=
TRIM (RTRIM (REPLACE (REPLACE (P_STR, ';', ','), ' ', ''), ','));
L_LEN := LENGTH (L_STR);
FOR I IN 1 .. L_LEN
LOOP
IF SUBSTR (L_STR, I, 1) <> ','
THEN
L_ADDR := L_ADDR || SUBSTR (L_STR, I, 1);
ELSE
J := J + 1;
IF P_SPLITE_FLAG = 1
THEN --表示处理邮件地址
--前后需要加上'<>'，否则很多邮箱将不能发送邮件
L_ADDR := '<' || L_ADDR || '>';
--调用邮件发送过程
MY_ADDRESS_LIST (J) := L_ADDR;
ELSIF P_SPLITE_FLAG = 2
THEN --表示处理附件名称
MY_ACCT_LIST (J) := L_ADDR;
END IF;
L_ADDR := '';
END IF;
IF I = L_LEN
THEN
J := J + 1;
IF P_SPLITE_FLAG = 1
THEN
--调用邮件发送过程
L_ADDR := '<' || L_ADDR || '>';
MY_ADDRESS_LIST (J) := L_ADDR;
ELSIF P_SPLITE_FLAG = 2
THEN
MY_ACCT_LIST (J) := L_ADDR;
END IF;
END IF;
END LOOP;
END;
------------------------------------------------写邮件头和邮件内容------------------------------------------
PROCEDURE WRITE_DATA (P_CONN IN OUT NOCOPY UTL_SMTP.CONNECTION,
P_NAME IN VARCHAR2,
P_VALUE IN VARCHAR2,
P_SPLITE VARCHAR2 DEFAULT ':' ,
P_CRLF VARCHAR2 DEFAULT L_CRLF )
IS
BEGIN
/* utl_raw.cast_to_raw 对解决中文乱码问题很重要*/
UTL_SMTP.WRITE_RAW_DATA (
P_CONN,
UTL_RAW.CAST_TO_RAW (
CONVERT (P_NAME || P_SPLITE || P_VALUE || P_CRLF, 'ZHS16GBK')
)
);
END;
----------------------------------------写MIME邮件尾部-----------------------------------------------------
PROCEDURE END_BOUNDARY (CONN IN OUT NOCOPY UTL_SMTP.CONNECTION,
LAST IN BOOLEAN DEFAULT FALSE )
IS
BEGIN
UTL_SMTP.WRITE_DATA (CONN, UTL_TCP.CRLF);
IF (LAST)
THEN
UTL_SMTP.WRITE_DATA (CONN, LAST_BOUNDARY);
END IF;
END;
----------------------------------------------发送附件----------------------------------------------------
PROCEDURE ATTACHMENT (
CONN IN OUT NOCOPY UTL_SMTP.CONNECTION,
MIME_TYPE IN VARCHAR2 DEFAULT 'text/plain' ,
INLINE IN BOOLEAN DEFAULT TRUE ,
FILENAME IN VARCHAR2 DEFAULT 't.txt' ,
TRANSFER_ENC IN VARCHAR2 DEFAULT '7 bit' ,
DT_NAME IN VARCHAR2 DEFAULT '0'
)
IS
L_FILENAME VARCHAR2 (1000);
BEGIN
--写附件头
UTL_SMTP.WRITE_DATA (CONN, FIRST_BOUNDARY);
--设置附件格式
WRITE_DATA (CONN, 'Content-Type', MIME_TYPE);
--如果文件名称非空，表示有附件
DROP_DIRECTORY (DT_NAME);
--创建directory
CREATE_DIRECTORY (DT_NAME, GET_FILE (FILENAME, 1));
--得到附件文件名称
L_FILENAME := GET_FILE (FILENAME, 2);
IF (INLINE)
THEN
WRITE_DATA (CONN,
'Content-Disposition',
'inline; filename="' || L_FILENAME || '"');
ELSE
WRITE_DATA (CONN,
'Content-Disposition',
'attachment; filename="' || L_FILENAME || '"');
END IF;
--设置附件的转换格式
IF (TRANSFER_ENC IS NOT NULL)
THEN
WRITE_DATA (CONN, 'Content-Transfer-Encoding', TRANSFER_ENC);
END IF;
UTL_SMTP.WRITE_DATA (CONN, UTL_TCP.CRLF);
--begin 贴附件内容
IF TRANSFER_ENC = 'bit 7'
THEN
--如果是文本类型的附件
BEGIN
L_FILE_HANDLE := UTL_FILE.FOPEN (DT_NAME, L_FILENAME, 'r'); --打开文件
--把附件分成多份，这样可以发送超过32K的附件
LOOP
UTL_FILE.GET_LINE (L_FILE_HANDLE, L_LINE);
L_MESG := L_LINE || L_CRLF;
WRITE_DATA (CONN,
'',
L_MESG,
'',
'');
END LOOP;
UTL_FILE.FCLOSE (L_FILE_HANDLE);
END_BOUNDARY (CONN);
EXCEPTION
WHEN OTHERS
THEN
UTL_FILE.FCLOSE (L_FILE_HANDLE);
END_BOUNDARY (CONN);
NULL;
END; --结束文本类型附件的处理
ELSIF TRANSFER_ENC = 'base64'
THEN
--如果是二进制类型的附件
BEGIN
--把附件分成多份，这样可以发送超过32K的附件
L_FILEPOS := 1; --重置offset，在发送多个附件时，必须重置
L_FIL := BFILENAME (DT_NAME, L_FILENAME);
L_FILE_LEN := DBMS_LOB.GETLENGTH (L_FIL);
L_MODULO := MOD (L_FILE_LEN, L_AMT);
L_PIECES := TRUNC (L_FILE_LEN / L_AMT);
IF (L_MODULO <> 0)
THEN
L_PIECES := L_PIECES + 1;
END IF;
DBMS_LOB.FILEOPEN (L_FIL, DBMS_LOB.FILE_READONLY);
DBMS_LOB.READ (L_FIL,
L_AMT,
L_FILEPOS,
L_BUF);
L_DATA := NULL;
FOR I IN 1 .. L_PIECES
LOOP
L_FILEPOS := I * L_AMT + 1;
L_FILE_LEN := L_FILE_LEN - L_AMT;
L_DATA := UTL_RAW.CONCAT (L_DATA, L_BUF);
L_CHUNKS := TRUNC (UTL_RAW.LENGTH (L_DATA) / L_MAX_LINE_WIDTH);
IF (I <> L_PIECES)
THEN
L_CHUNKS := L_CHUNKS - 1;
END IF;
UTL_SMTP.WRITE_RAW_DATA (CONN,
UTL_ENCODE.BASE64_ENCODE (L_DATA));
L_DATA := NULL;
IF (L_FILE_LEN < L_AMT AND L_FILE_LEN > 0)
THEN
L_AMT := L_FILE_LEN;
END IF;
DBMS_LOB.READ (L_FIL,
L_AMT,
L_FILEPOS,
L_BUF);
END LOOP;
DBMS_LOB.FILECLOSE (L_FIL);
END_BOUNDARY (CONN);
EXCEPTION
WHEN OTHERS
THEN
DBMS_LOB.FILECLOSE (L_FIL);
END_BOUNDARY (CONN);
RAISE;
END; --结束处理二进制附件
END IF; --结束处理附件内容
DROP_DIRECTORY (DT_NAME);
END; --结束过程ATTACHMENT
---------------------------------------------真正发送邮件的过程--------------------------------------------
PROCEDURE P_EMAIL (P_SENDORADDRESS2 VARCHAR2, --发送地址
P_RECEIVERADDRESS2 VARCHAR2) --接受地址
IS
L_CONN UTL_SMTP.CONNECTION; --定义连接
BEGIN
/*初始化邮件服务器信息，连接邮件服务器*/
L_CONN := UTL_SMTP.OPEN_CONNECTION (P_SERVER, P_PORT);
UTL_SMTP.HELO (L_CONN, P_SERVER);
/* smtp服务器登录校验 */
IF P_NEED_SMTP = 1
THEN
UTL_SMTP.COMMAND (L_CONN, 'AUTH LOGIN', '');
UTL_SMTP.COMMAND (
L_CONN,
UTL_RAW.CAST_TO_VARCHAR2 (
UTL_ENCODE.BASE64_ENCODE (UTL_RAW.CAST_TO_RAW (P_USER))
)
);
UTL_SMTP.COMMAND (
L_CONN,
UTL_RAW.CAST_TO_VARCHAR2 (
UTL_ENCODE.BASE64_ENCODE (UTL_RAW.CAST_TO_RAW (P_PASS))
)
);
END IF;
/*设置发送地址和接收地址*/
UTL_SMTP.MAIL (L_CONN, P_SENDORADDRESS2);
UTL_SMTP.RCPT (L_CONN, P_RECEIVERADDRESS2);
/*设置邮件头*/
UTL_SMTP.OPEN_DATA (L_CONN);
WRITE_DATA (L_CONN, 'Date', TO_CHAR (SYSDATE, 'yyyy-mm-dd hh34:mi:ss'));
/*设置发送人*/
WRITE_DATA (L_CONN, 'From', P_SENDOR);
/*设置接收人*/
WRITE_DATA (L_CONN, 'To', P_RECEIVER);
/*设置邮件主题*/
WRITE_DATA (L_CONN, 'Subject', P_SUB);
WRITE_DATA (L_CONN, 'Content-Type', MULTIPART_MIME_TYPE);
UTL_SMTP.WRITE_DATA (L_CONN, UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA (L_CONN, FIRST_BOUNDARY);
WRITE_DATA (L_CONN, 'Content-Type', 'text/plain;charset=gb2312');
--单独空一行，否则，正文内容不显示
UTL_SMTP.WRITE_DATA (L_CONN, UTL_TCP.CRLF);
/* 设置邮件正文
把分隔符还原成chr(10)。这主要是为了shell中调用该过程，如果有多行，则先把多行的内容合并成一行，并用 l_splite分隔
然后用 l_crlf替换chr(10)。这一步是必须的，否则将不能发送邮件正文有多行的邮件
*/
WRITE_DATA (
L_CONN,
'',
REPLACE (REPLACE (P_TXT, L_SPLITE, CHR (10)), CHR (10), L_CRLF),
'',
''
);
END_BOUNDARY (L_CONN);
--如果文件名称不为空，则发送附件
IF (P_FILENAME IS NOT NULL)
THEN
--根据逗号或者分号拆分附件地址
P_SPLITE_STR (P_FILENAME, 2);
--循环发送附件(在同一个邮件中)
FOR K IN 1 .. MY_ACCT_LIST.COUNT
LOOP
ATTACHMENT (
CONN => L_CONN,
FILENAME => MY_ACCT_LIST (K),
TRANSFER_ENC => P_ENCODE,
DT_NAME => L_DIRECTORY_BASE_NAME || TO_CHAR (K)
);
END LOOP;
END IF;
/*关闭数据写入*/
UTL_SMTP.CLOSE_DATA (L_CONN);
/*关闭连接*/
UTL_SMTP.QUIT (L_CONN);
/*异常处理*/
EXCEPTION
WHEN OTHERS
THEN
NULL;
RAISE;
END;
---------------------------------------------------主过程-----------------------------------------------------
BEGIN
L_SENDORADDRESS := '<' || P_SENDOR || '>';
P_SPLITE_STR (P_RECEIVER); --处理邮件地址
FOR K IN 1 .. MY_ADDRESS_LIST.COUNT
LOOP
P_EMAIL (L_SENDORADDRESS, MY_ADDRESS_LIST (K));
END LOOP;
/*处理邮件地址，根据逗号分割邮件*/
EXCEPTION
WHEN OTHERS
THEN
RAISE;
END;
网站栏目：ORACLE_自动发邮件代码
地址分享：http://wjwzjz.com/article/iieoso.html
ORACLE_SID=orcl
ORACLE_BASE=/opt/oracle
ORACLE_HOME=/opt/oracle/product/10.2.0
export ORACLE_SID ORACLE_BASE ORACLE_HOME
PWD_DIR=/home/oracle/shell
SQLPLUS=${ORACLE_HOME}/bin/sqlplus
CONFIG_INI=${PWD_DIR}/ini/config.ini
while read gameuser
do
echo ${gameuser}
echo ${SQLPLUS}
cd ${PWD_DIR}
${SQLPLUS} ${gameuser} << !
@etl_monitor.sql;
/
exit;
!
done<${CONFIG_INI}
etl_monitor.sql脚本为：
DECLARE
p_txt VARCHAR2 (4000);
p_txt_all VARCHAR2 (4000);
BEGIN
FOR r IN (SELECT job_name,
run_cnt,
table_name,
column_name
FROM etl_monitor_config_tab)
LOOP
-- Call the Etl Monitor function
p_txt :=
etl_monitor (r.job_name,
r.run_cnt,
r.table_name,
r.column_name);
p_txt_all := p_txt_all || CHR (13) || p_txt;
END LOOP;
-- Call the Send Mail function
procsendemail (p_txt_all,
'Etl Moniotr',
'xxx@163.com',
'xxxx@kingsoft.com',
'mail.kingsoft.com',
25,
1,
'xxxxxx',
'xxxxxx',
'',
'bit 7');
p_txt_all := '';
END;
create or replace function etl_monitor(job_name varchar2,
run_cnt int,
table_name varchar2,
column_name varchar2)
RETURN varchar2 IS
v_monitor_date date; --The monitor of the proc's date
v_job_name varchar2(130);
v_log_id number;
v_result1 char(1); --The status of the proc's result1
v_result2 char(1); --The status of the proc's result2
v_status_cnt int;
v_record_num int; --The number of the job run
v_result varchar2(4000);
v_sql varchar2(1000);
begin
v_monitor_date := trunc(sysdate);
v_job_name := job_name;
v_result1 := '0';
v_result2 := '0';
v_sql := 'select count(1) from ';
if run_cnt = 1 then
select log_id
into v_log_id
from user_scheduler_job_run_details
where job_name = v_job_name
and trunc(actual_start_date) = v_monitor_date;
else
select max(log_id)
into v_log_id
from user_scheduler_job_run_details
where job_name = v_job_name
and trunc(actual_start_date) = v_monitor_date;
end if;
select count(*)
into v_status_cnt
from user_scheduler_job_run_details
where log_id = v_log_id
and status = 'SUCCEEDED';
if v_status_cnt = 0 then
goto error1;
end if;
v_result1 := '1';
v_sql := v_sql || table_name || ' ' || 'where trunc(' || column_name ||
') =' || 'trunc(sysdate-1) and rownum=1';
execute immediate v_sql
into v_record_num;
if v_record_num > 0 then
v_result2 := '1';
else
v_status_cnt := 0;
goto error1;
end if;
if v_result1 = '1' and v_result2 = '1' then
v_result := SYS_CONTEXT('USERENV', 'CURRENT_SCHEMA') || '.' ||
v_job_name || ' At ' || v_monitor_date || ' IS SUCCEEDED';
end if;
<
if v_status_cnt = 0 then
select OWNER || '.' || JOB_NAME || ' At ' || TRUNC(ACTUAL_START_DATE) ||
'IS ' ADDITIONAL_INFO
into v_result
from user_scheduler_job_run_details
where log_id = v_log_id;
end if;
return v_result;
exception
when others then
return SYS_CONTEXT('USERENV', 'CURRENT_SCHEMA') || '.' || v_job_name || ' At ' || v_monitor_date || ' IS NOT EXECUTE';
end;
最主要的procsendmail的过程为：
CREATE OR REPLACE PROCEDURE PROCSENDEMAIL (
P_TXT VARCHAR2,
P_SUB VARCHAR2,
P_SENDOR VARCHAR2,
P_RECEIVER VARCHAR2,
P_SERVER VARCHAR2,
P_PORT NUMBER DEFAULT 25 ,
P_NEED_SMTP INT DEFAULT 0 ,
P_USER VARCHAR2 DEFAULT NULL ,
P_PASS VARCHAR2 DEFAULT NULL ,
P_FILENAME VARCHAR2 DEFAULT NULL ,
P_ENCODE VARCHAR2 DEFAULT 'bit 7'
)
AUTHID CURRENT_USER
IS
/*
作用：用oracle发送邮件
主要功能：1、支持多收件人。
2、支持中文
3、支持抄送人
4、支持大于32K的附件
5、支持多行正文
6、支持多附件
7、支持文本附件和二进制附件
8、支持HTML格式
8、支持
作者：suk
参数说明：
p_txt :邮件正文
p_sub: 邮件标题
p_SendorAddress : 发送人邮件地址
p_ReceiverAddress : 接收地址，可以同时发送到多个地址上，地址之间用","或者";"隔开
p_EmailServer : 邮件服务器地址，可以是域名或者IP
p_Port ：邮件服务器端口
p_need_smtp：是否需要smtp认证，0表示不需要，1表示需要
p_user：smtp验证需要的用户名
p_pass：smtp验证需要的密码
p_filename：附件名称，必须包含完整的路径，如"d:\temp\a.txt"。
可以有多个附件，附件名称只见用逗号或者分号分隔
p_encode：附件编码转换格式，其中 p_encode='bit 7' 表示文本类型附件
p_encode='base64' 表示二进制类型附件
注意：
1、对于文本类型的附件，不能用base64的方式发送，否则出错
2、对于多个附件只能用同一种格式发送
*/
L_CRLF VARCHAR2 (2) := UTL_TCP.CRLF;
L_SENDORADDRESS VARCHAR2 (4000);
L_SPLITE VARCHAR2 (10) := '++';
BOUNDARY CONSTANT VARCHAR2 (256) := '-----BYSUK';
FIRST_BOUNDARY CONSTANT VARCHAR2 (256) := '--' || BOUNDARY || L_CRLF;
LAST_BOUNDARY CONSTANT VARCHAR2 (256)
:= '--' || BOUNDARY || '--' || L_CRLF ;
MULTIPART_MIME_TYPE CONSTANT VARCHAR2 (256)
:= 'multipart/mixed; boundary="' || BOUNDARY || '"' ;
/* 以下部分是发送大二进制附件时用到的变量 */
L_FIL BFILE;
L_FILE_LEN NUMBER;
L_MODULO NUMBER;
L_PIECES NUMBER;
L_FILE_HANDLE UTL_FILE.FILE_TYPE;
L_AMT BINARY_INTEGER := 672 * 3; /* ensures proper format; 2016 */
L_FILEPOS PLS_INTEGER := 1; /* pointer for the file */
L_CHUNKS NUMBER;
L_BUF RAW (2100);
L_DATA RAW (2100);
L_MAX_LINE_WIDTH NUMBER := 54;
L_DIRECTORY_BASE_NAME VARCHAR2 (100) := 'DIR_FOR_SEND_MAIL';
L_LINE VARCHAR2 (1000);
L_MESG VARCHAR2 (32767);
/* 以上部分是发送大二进制附件时用到的变量 */
TYPE ADDRESS_LIST
IS
TABLE OF VARCHAR2 (100)
INDEX BY BINARY_INTEGER;
MY_ADDRESS_LIST ADDRESS_LIST;
TYPE ACCT_LIST
IS
TABLE OF VARCHAR2 (100)
INDEX BY BINARY_INTEGER;
MY_ACCT_LIST ACCT_LIST;
-------------------------------------返回附件源文件所在目录或者名称-----------------------
FUNCTION GET_FILE (P_FILE VARCHAR2, P_GET INT)
RETURN VARCHAR2
IS
--p_get=1 表示返回目录
--p_get=2 表示返回文件名
L_FILE VARCHAR2 (1000);
BEGIN
IF INSTR (P_FILE, '\') > 0
THEN
--windows
IF P_GET = 1
THEN
L_FILE := SUBSTR (P_FILE, 1, INSTR (P_FILE, '\', -1) - 1);
ELSIF P_GET = 2
THEN
L_FILE :=
SUBSTR (P_FILE, - (LENGTH (P_FILE) - INSTR (P_FILE, '\', -1)));
END IF;
ELSIF INSTR (P_FILE, '/') > 0
THEN
--linux/unix
IF P_GET = 1
THEN
L_FILE := SUBSTR (P_FILE, 1, INSTR (P_FILE, '/', -1) - 1);
ELSIF P_GET = 2
THEN
L_FILE :=
SUBSTR (P_FILE, - (LENGTH (P_FILE) - INSTR (P_FILE, '/', -1)));
END IF;
END IF;
RETURN L_FILE;
END;
---------------------------------------------删除directory------------------------------------
PROCEDURE DROP_DIRECTORY (P_DIRECTORY_NAME VARCHAR2)
IS
BEGIN
EXECUTE IMMEDIATE 'drop directory ' || P_DIRECTORY_NAME;
EXCEPTION
WHEN OTHERS
THEN
NULL;
END;
--------------------------------------------------创建directory-----------------------------------------
PROCEDURE CREATE_DIRECTORY (P_DIRECTORY_NAME VARCHAR2, P_DIR VARCHAR2)
IS
BEGIN
EXECUTE IMMEDIATE 'create directory '
|| P_DIRECTORY_NAME
|| ' as '''
|| P_DIR
|| '''';
EXECUTE IMMEDIATE 'grant read,write on directory '
|| P_DIRECTORY_NAME
|| ' to public';
EXCEPTION
WHEN OTHERS
THEN
RAISE;
END;
--------------------------------------------分割邮件地址或者附件地址--------------------
PROCEDURE P_SPLITE_STR (P_STR VARCHAR2, P_SPLITE_FLAG INT DEFAULT 1 )
IS
L_ADDR VARCHAR2 (254) := '';
L_LEN INT;
L_STR VARCHAR2 (4000);
J INT := 0; --表示邮件地址或者附件的个数
BEGIN
/*处理接收邮件地址列表，包括去空格、将;转换为,等*/
L_STR :=
TRIM (RTRIM (REPLACE (REPLACE (P_STR, ';', ','), ' ', ''), ','));
L_LEN := LENGTH (L_STR);
FOR I IN 1 .. L_LEN
LOOP
IF SUBSTR (L_STR, I, 1) <> ','
THEN
L_ADDR := L_ADDR || SUBSTR (L_STR, I, 1);
ELSE
J := J + 1;
IF P_SPLITE_FLAG = 1
THEN --表示处理邮件地址
--前后需要加上'<>'，否则很多邮箱将不能发送邮件
L_ADDR := '<' || L_ADDR || '>';
--调用邮件发送过程
MY_ADDRESS_LIST (J) := L_ADDR;
ELSIF P_SPLITE_FLAG = 2
THEN --表示处理附件名称
MY_ACCT_LIST (J) := L_ADDR;
END IF;
L_ADDR := '';
END IF;
IF I = L_LEN
THEN
J := J + 1;
IF P_SPLITE_FLAG = 1
THEN
--调用邮件发送过程
L_ADDR := '<' || L_ADDR || '>';
MY_ADDRESS_LIST (J) := L_ADDR;
ELSIF P_SPLITE_FLAG = 2
THEN
MY_ACCT_LIST (J) := L_ADDR;
END IF;
END IF;
END LOOP;
END;
------------------------------------------------写邮件头和邮件内容------------------------------------------
PROCEDURE WRITE_DATA (P_CONN IN OUT NOCOPY UTL_SMTP.CONNECTION,
P_NAME IN VARCHAR2,
P_VALUE IN VARCHAR2,
P_SPLITE VARCHAR2 DEFAULT ':' ,
P_CRLF VARCHAR2 DEFAULT L_CRLF )
IS
BEGIN
/* utl_raw.cast_to_raw 对解决中文乱码问题很重要*/
UTL_SMTP.WRITE_RAW_DATA (
P_CONN,
UTL_RAW.CAST_TO_RAW (
CONVERT (P_NAME || P_SPLITE || P_VALUE || P_CRLF, 'ZHS16GBK')
)
);
END;
----------------------------------------写MIME邮件尾部-----------------------------------------------------
PROCEDURE END_BOUNDARY (CONN IN OUT NOCOPY UTL_SMTP.CONNECTION,
LAST IN BOOLEAN DEFAULT FALSE )
IS
BEGIN
UTL_SMTP.WRITE_DATA (CONN, UTL_TCP.CRLF);
IF (LAST)
THEN
UTL_SMTP.WRITE_DATA (CONN, LAST_BOUNDARY);
END IF;
END;
----------------------------------------------发送附件----------------------------------------------------
PROCEDURE ATTACHMENT (
CONN IN OUT NOCOPY UTL_SMTP.CONNECTION,
MIME_TYPE IN VARCHAR2 DEFAULT 'text/plain' ,
INLINE IN BOOLEAN DEFAULT TRUE ,
FILENAME IN VARCHAR2 DEFAULT 't.txt' ,
TRANSFER_ENC IN VARCHAR2 DEFAULT '7 bit' ,
DT_NAME IN VARCHAR2 DEFAULT '0'
)
IS
L_FILENAME VARCHAR2 (1000);
BEGIN
--写附件头
UTL_SMTP.WRITE_DATA (CONN, FIRST_BOUNDARY);
--设置附件格式
WRITE_DATA (CONN, 'Content-Type', MIME_TYPE);
--如果文件名称非空，表示有附件
DROP_DIRECTORY (DT_NAME);
--创建directory
CREATE_DIRECTORY (DT_NAME, GET_FILE (FILENAME, 1));
--得到附件文件名称
L_FILENAME := GET_FILE (FILENAME, 2);
IF (INLINE)
THEN
WRITE_DATA (CONN,
'Content-Disposition',
'inline; filename="' || L_FILENAME || '"');
ELSE
WRITE_DATA (CONN,
'Content-Disposition',
'attachment; filename="' || L_FILENAME || '"');
END IF;
--设置附件的转换格式
IF (TRANSFER_ENC IS NOT NULL)
THEN
WRITE_DATA (CONN, 'Content-Transfer-Encoding', TRANSFER_ENC);
END IF;
UTL_SMTP.WRITE_DATA (CONN, UTL_TCP.CRLF);
--begin 贴附件内容
IF TRANSFER_ENC = 'bit 7'
THEN
--如果是文本类型的附件
BEGIN
L_FILE_HANDLE := UTL_FILE.FOPEN (DT_NAME, L_FILENAME, 'r'); --打开文件
--把附件分成多份，这样可以发送超过32K的附件
LOOP
UTL_FILE.GET_LINE (L_FILE_HANDLE, L_LINE);
L_MESG := L_LINE || L_CRLF;
WRITE_DATA (CONN,
'',
L_MESG,
'',
'');
END LOOP;
UTL_FILE.FCLOSE (L_FILE_HANDLE);
END_BOUNDARY (CONN);
EXCEPTION
WHEN OTHERS
THEN
UTL_FILE.FCLOSE (L_FILE_HANDLE);
END_BOUNDARY (CONN);
NULL;
END; --结束文本类型附件的处理
ELSIF TRANSFER_ENC = 'base64'
THEN
--如果是二进制类型的附件
BEGIN
--把附件分成多份，这样可以发送超过32K的附件
L_FILEPOS := 1; --重置offset，在发送多个附件时，必须重置
L_FIL := BFILENAME (DT_NAME, L_FILENAME);
L_FILE_LEN := DBMS_LOB.GETLENGTH (L_FIL);
L_MODULO := MOD (L_FILE_LEN, L_AMT);
L_PIECES := TRUNC (L_FILE_LEN / L_AMT);
IF (L_MODULO <> 0)
THEN
L_PIECES := L_PIECES + 1;
END IF;
DBMS_LOB.FILEOPEN (L_FIL, DBMS_LOB.FILE_READONLY);
DBMS_LOB.READ (L_FIL,
L_AMT,
L_FILEPOS,
L_BUF);
L_DATA := NULL;
FOR I IN 1 .. L_PIECES
LOOP
L_FILEPOS := I * L_AMT + 1;
L_FILE_LEN := L_FILE_LEN - L_AMT;
L_DATA := UTL_RAW.CONCAT (L_DATA, L_BUF);
L_CHUNKS := TRUNC (UTL_RAW.LENGTH (L_DATA) / L_MAX_LINE_WIDTH);
IF (I <> L_PIECES)
THEN
L_CHUNKS := L_CHUNKS - 1;
END IF;
UTL_SMTP.WRITE_RAW_DATA (CONN,
UTL_ENCODE.BASE64_ENCODE (L_DATA));
L_DATA := NULL;
IF (L_FILE_LEN < L_AMT AND L_FILE_LEN > 0)
THEN
L_AMT := L_FILE_LEN;
END IF;
DBMS_LOB.READ (L_FIL,
L_AMT,
L_FILEPOS,
L_BUF);
END LOOP;
DBMS_LOB.FILECLOSE (L_FIL);
END_BOUNDARY (CONN);
EXCEPTION
WHEN OTHERS
THEN
DBMS_LOB.FILECLOSE (L_FIL);
END_BOUNDARY (CONN);
RAISE;
END; --结束处理二进制附件
END IF; --结束处理附件内容
DROP_DIRECTORY (DT_NAME);
END; --结束过程ATTACHMENT
---------------------------------------------真正发送邮件的过程--------------------------------------------
PROCEDURE P_EMAIL (P_SENDORADDRESS2 VARCHAR2, --发送地址
P_RECEIVERADDRESS2 VARCHAR2) --接受地址
IS
L_CONN UTL_SMTP.CONNECTION; --定义连接
BEGIN
/*初始化邮件服务器信息，连接邮件服务器*/
L_CONN := UTL_SMTP.OPEN_CONNECTION (P_SERVER, P_PORT);
UTL_SMTP.HELO (L_CONN, P_SERVER);
/* smtp服务器登录校验 */
IF P_NEED_SMTP = 1
THEN
UTL_SMTP.COMMAND (L_CONN, 'AUTH LOGIN', '');
UTL_SMTP.COMMAND (
L_CONN,
UTL_RAW.CAST_TO_VARCHAR2 (
UTL_ENCODE.BASE64_ENCODE (UTL_RAW.CAST_TO_RAW (P_USER))
)
);
UTL_SMTP.COMMAND (
L_CONN,
UTL_RAW.CAST_TO_VARCHAR2 (
UTL_ENCODE.BASE64_ENCODE (UTL_RAW.CAST_TO_RAW (P_PASS))
)
);
END IF;
/*设置发送地址和接收地址*/
UTL_SMTP.MAIL (L_CONN, P_SENDORADDRESS2);
UTL_SMTP.RCPT (L_CONN, P_RECEIVERADDRESS2);
/*设置邮件头*/
UTL_SMTP.OPEN_DATA (L_CONN);
WRITE_DATA (L_CONN, 'Date', TO_CHAR (SYSDATE, 'yyyy-mm-dd hh34:mi:ss'));
/*设置发送人*/
WRITE_DATA (L_CONN, 'From', P_SENDOR);
/*设置接收人*/
WRITE_DATA (L_CONN, 'To', P_RECEIVER);
/*设置邮件主题*/
WRITE_DATA (L_CONN, 'Subject', P_SUB);
WRITE_DATA (L_CONN, 'Content-Type', MULTIPART_MIME_TYPE);
UTL_SMTP.WRITE_DATA (L_CONN, UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA (L_CONN, FIRST_BOUNDARY);
WRITE_DATA (L_CONN, 'Content-Type', 'text/plain;charset=gb2312');
--单独空一行，否则，正文内容不显示
UTL_SMTP.WRITE_DATA (L_CONN, UTL_TCP.CRLF);
/* 设置邮件正文
把分隔符还原成chr(10)。这主要是为了shell中调用该过程，如果有多行，则先把多行的内容合并成一行，并用 l_splite分隔
然后用 l_crlf替换chr(10)。这一步是必须的，否则将不能发送邮件正文有多行的邮件
*/
WRITE_DATA (
L_CONN,
'',
REPLACE (REPLACE (P_TXT, L_SPLITE, CHR (10)), CHR (10), L_CRLF),
'',
''
);
END_BOUNDARY (L_CONN);
--如果文件名称不为空，则发送附件
IF (P_FILENAME IS NOT NULL)
THEN
--根据逗号或者分号拆分附件地址
P_SPLITE_STR (P_FILENAME, 2);
--循环发送附件(在同一个邮件中)
FOR K IN 1 .. MY_ACCT_LIST.COUNT
LOOP
ATTACHMENT (
CONN => L_CONN,
FILENAME => MY_ACCT_LIST (K),
TRANSFER_ENC => P_ENCODE,
DT_NAME => L_DIRECTORY_BASE_NAME || TO_CHAR (K)
);
END LOOP;
END IF;
/*关闭数据写入*/
UTL_SMTP.CLOSE_DATA (L_CONN);
/*关闭连接*/
UTL_SMTP.QUIT (L_CONN);
/*异常处理*/
EXCEPTION
WHEN OTHERS
THEN
NULL;
RAISE;
END;
---------------------------------------------------主过程-----------------------------------------------------
BEGIN
L_SENDORADDRESS := '<' || P_SENDOR || '>';
P_SPLITE_STR (P_RECEIVER); --处理邮件地址
FOR K IN 1 .. MY_ADDRESS_LIST.COUNT
LOOP
P_EMAIL (L_SENDORADDRESS, MY_ADDRESS_LIST (K));
END LOOP;
/*处理邮件地址，根据逗号分割邮件*/
EXCEPTION
WHEN OTHERS
THEN
RAISE;
END;
网站栏目：ORACLE_自动发邮件代码
地址分享：http://wjwzjz.com/article/iieoso.html